Construction of the feeder rod

Feeder rod design:

• Handle;

• Reel holder;

• Blank;

• Pass rings;

• Quivertip - removable tips. 

Features of the handle

The handles of long models are longer and can be divided into two parts on both sides of the reel. This is made for long casting tackle.

Types of reel seat mounts

There are two types of feeder coil mounts. The first is a classic clamp, and the second is a screw clamp with a nut, which can be located at the back or at the front. The rear location of the nut is used in budget gear.

Blank

Today there are plug-in and telescopic designs of feeders.

Plug feeder

The plug feeder belongs to the category of collapsible fishing rods. The plug-in model has a long service life. There is a possibility of a normal arrangement of slip rings.

Plug feeders are:

• 2-knee;

• 3-knee.

Telescopic feeder

A telescopic feeder is a complex rod, the diameter of the sections of which gradually decreases, starting from the first, the thickest one. The rod quickly unfolds and folds. Provides rigidity.

Rings

Passing rings are an important part of the feeder. The material from which the rings are made is important.

Quivertip

Quivertype is a special alarm. They usually come in a set of 2-4 pieces.

In terms of stiffness, quivertype is:

• Soft;

• Medium;

• Tough.

Made of different material, have different number of rings, length, color, and test (measured in ounces).